Source image: 100% Motosport Goggles
Fitting a Lens to your Motocross Goggles isn't easy as looks
While a lot of the latest goggle offerings from brands such as Oakley, Scott and Dragon feature neat and simple locking systems for lenses, most traditional goggles can be a bit of pain when reinstalling a lens. Here are three critical tips that will make the ease up process.
Image source: 100% Eyewear
1. Start from the top centre point
This is the most important part, if you start from anywhere else, it really messes up the procedure and makes it much more fiddly. You'll notice there are several recessed points on the edges of lens that click into the corresponding points inside the goggle frame, start with the top centre one, then click in the ones on each side.
2. Ensure edges are clicked in
Next is to do the same on the edges, and it make take a bit of pressure to push the lens right up into the corners and get it clicked into place. If you get this right the first time, it will make the final step a seamless process.
3. Seal up the bottom
When you get to clicking in the bottom of the lens - and ultimately the end of the process - you'll quickly know if everything is aligned. For this one, start from the edges first, and finish off with the centre - exactly the opposite to step one. If you find it's not aligning correctly, revert back to step two and fiddle around with it to try and get it in the correct spot.